Removal

1GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE V-BANK COVER Removal

3. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH Removal

4. REMOVE NO.1 ENGINE UNDER COVER SUB-ASSEMBLY (for 4WD and Pre Runner Drive Type)

(a) Remove the 4 bolts and engine under cover.

5. REMOVE FAN SHROUD Removal

6. REMOVE CRANKSHAFT PULLEY Removal

7. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL





(a) Using a screwdriver, pry out the oil seal.

NOTICE:
Be careful not to damage the crankshaft. Wrap a tip of the screwdriver with tape.