Removal

A750E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: REMOVAL

1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Using a screwdriver, unstake the lock washer.





Text in Illustration





(b) Remove the nut, lock washer and grommet.

(c) Remove the bolt and the park/neutral position switch assembly.

HINT
Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.