Removal

AXLE: REAR AXLE SHAFT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR WHEEL

3. DRAIN BRAKE FLUID

4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY Removal

5. REMOVE FRONT BRAKE SHOE Disassembly

6. REMOVE REAR BRAKE SHOE Disassembly

7. REMOVE REAR SPEED SENSOR Removal

8. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO. 3





(a) Remove the 2 bolts and disconnect the parking brake cable from the backing plate.

9. SEPARATE REAR BRAKE TUBE NO. 8





(a) Using a union nut wrench, separate the brake tube, and use a container to catch the brake fluid as it flows out.

10. REMOVE REAR AXLE SHAFT WITH BACKING PLATE





(a) Remove the 4 nuts and rear axle shaft with backing plate.

(b) Remove the O-ring.

11. REMOVE REAR AXLE SHAFT OIL SEAL





(a) Using SST, remove the oil seal.

SST : 09308-00010