C1AE0

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C1AE0: Front Left Side Sensor
C1AE0 - Front Left Side Sensor

DESCRIPTION

This DTC is stored when the parking assist ECU receives an abnormal signal from the No. 1 ultrasonic sensor (front left side sensor) immediately after the power switch is turned on (IG) or while the No. 1 ultrasonic sensor is operating (neither P nor R is selected, and the vehicle is not stopped).





INSPECTION PROCEDURE

NOTICE:
* When "System initializing" message is displayed on the navigation receiver assembly after the battery terminal disconnected, correct the steering angle neutral point Initialization.
* Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the advanced parking guidance system may be needed Calibration.

PROCEDURE

1. REPLACE NO. 1 ULTRASONIC SENSOR (FRONT LEFT SIDE SENSOR)

(a) Replace the No. 1 ultrasonic sensor (front left side sensor) with a normally functioning sensor Removal.

NEXT -- Continue to next step.

2. CHECK DTC OUTPUT

(a) Clear the DTCs Advanced Parking Guidance System.

(b) Check for DTCs Advanced Parking Guidance System.

Result:





B -- END (FRONT LEFT SIDE SENSOR WAS DEFECTIVE)

A -- REPLACE PARKING ASSIST ECU Removal