Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

HINT
* Refer to the procedures up to Remove Roof Side Inner Garnish Assembly Removal.
* Removal should be performed only for the left side.
3. REMOVE TIRE PRESSURE WARNING RECEIVER

(a) Remove the bolt.





(b) Disconnect the connector to remove the tire pressure warning receiver.