Installation

WIPER / WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION

1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY

(a) Engage the 2 claws to install the headlight washer actuator sub-assembly.





(b) Install the bolt.

Torque : 1.1 Nm (11 kgf-cm, 10 in-lbf)

(c) Connect the headlight washer hose.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL HEADLIGHT CLEANER WASHER NOZZLE Installation

3. INSTALL FRONT BUMPER ASSEMBLY Installation

4. INSTALL RADIATOR SUPPORT OPENING COVER Installation

5. ADD WASHER FLUID Installation

6. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) Adjustments

7. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

8. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

9. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments