Removal

REAR SUSPENSION: REAR LOWER ARM: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
* The rear No. 2 suspension arm assembly can be removed directly from the vehicle.

1. REMOVE REAR WHEELS

2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor)

Removal

3. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY

(a) Remove the bolt and nut, and separate the rear No. 2 suspension arm assembly (outer side) from the rear axle carrier sub-assembly.





NOTICE:
When removing the bolt, keep the nut from rotating.

4. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY

(a) Remove the bolt and rear No. 2 suspension arm assembly from the rear suspension member sub-assembly.





5. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

Removal

6. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY

(a) Remove the bolt and rear No. 1 suspension arm assembly from the rear suspension member sub-assembly.