Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE INTEGRATION CONTROL AND PANEL Removal

9. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal

10. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

11. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Removal

12. REMOVE NO. 1 RADIO RECEIVER BRACKET Removal

13. REMOVE NO. 2 RADIO RECEIVER BRACKET

HINT
Use the same procedure as for the No. 1 radio receiver bracket.

14. REMOVE EXTENSION MODULE

(a) Disconnect each connector to remove the navigation wire.





(b) Disconnect the connector to remove the extension module.