Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1993 >> Passat V6-2792cc 2.8L DOHC >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Belt: Service and Repair

Poly-ribbed belt, 6 cylinder engine, removing/installing

NOTE: When installing the poly-ribbed belt be sure it is properly seated on the pulley.

Removing

Disconnect Evaporative (EVAP) Emission Canister Purge Regulator Valve (N80) with retaining ring from air cleaner lower section. Refer to Powertrain Management, Fuel Delivery and Air Induction, Air Cleaner Housing Locations
Remove air cleaner housing complete with Mass Air Flow Sensor (G70)






Screw in bolt M8 X 80 into threaded hole -A- until tension of poly-ribbed belt is released.

CAUTION: Only screw in bolt until the poly-ribbed belt can be removed. Too much tightening can damage the tensioner housing.

Remove poly-ribbed belt.

Installing






Note: Before installing Poly-ribbed belts ensure that all assemblies e.g. Generator (GEN), Power steering pump are securely installed. Vehicles with A/C are equipped with double Poly-ribbed belts.

Install poly-ribbed belt.
Remove M 8 bolt from tensioner.
Install air cleaner housing.
Start engine and check poly-ribbed belt operation.



pro multis · About Operation CHARM