Transmission Fluid Pressure Switch E (6th Clutch) Replacement

Transmission Fluid Pressure Switch E (6th Clutch) Replacement

1. Do the battery removal procedure Removal and Replacement.

2. Remove the main under-hood fuse box from the battery base.

3. Remove the intake air duct and the air cleaner housing.

4. Remove the battery base and the battery base bracket.

5. Disconnect the transmission fluid pressure switch E (6th clutch) connector, and remove transmission fluid pressure switch E (6th clutch) (A) and the sealing washer (B).





6. Install a new transmission fluid pressure switch E (6th clutch) and a new sealing washer, and tighten the switch.

7. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

8. Install the battery base bracket and the battery base.

9. Install the air cleaner housing and the intake air duct.

10. Install the main under-hood fuse box on the battery base.

11. Do the battery installation procedure Removal and Replacement.