Power Mirror Replacement

Power Mirror Replacement

NOTE:

- Put on gloves protect your hands.
- Take care not to scratch the door or the related parts.

1. Raise the door glass fully.

2. Remove these items:

- Door panel Front Door Panel Removal / Installation
- Plastic cover, as needed

3. Disconnect the connector (A), and detach the harness clip (B).






4. While holding the mirror (A), remove the nuts securing the mirror.






5. While holding the mirror (A), detach the clip (B), then remove the mirror, and pull out the harness (C) through the hole in the door.





6. Install the mirror in the reverse order of removal, and note these items:

- Make sure the connector is plugged in properly.
- When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.