Driving Position Memory System Description

Driving Position Memory System Description

The driver's seat and the power mirrors have a memory feature. All the adjustments can be memorized by pressing the SET button on the driving position memory switch, and then pressing one of two position buttons within 5 seconds. Pressing the appropriate position button will move the seat to the memorized positions.

Along with the seat settings, the power door lock settings will also be memorized based on which keyless transmitter (Driver 1 or Driver 2) is used.

This system is integrated with the multiplex integrated control system, and has 9 wake-up and sleep modes. All digital signals are sent via shared B-CAN and UART communication lines. For more information about communication line and wake-up/sleep mode, refer to the Multiplex Integrated Control System Description Multiplex Integrated Control System Description.

Disconnecting the battery erases the memorized positions.

Memorizing a Seat and Mirror Position

Move the seat and mirrors to the desired position. Turn the ignition switch to ON (II).
Press and hold the SET button on the driver's position memory switch. A single beep is heard and both of the green LEDs begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There is two more beeps confirming that the seat and the mirror are memorized. The green LED remains lit, unless the seat is moved from the memorized position.

Memorized Position Recall with the Remotes

After the seat and mirror positions are memorized, the seat and the mirror move to the position when the appropriate remote UNLOCK button is pressed and the driver's door is opened. When the seat and mirrors move to the memorized position, the green LED corresponding with that remote stays lit until the position is changed or the key is turned to LOCK (0).






Power Seat Position Sensors

Each motor has a sensor that detects motor rotation and sends a pulse to the power seat control unit when the motor rotates. The control unit stores the number of pulses in its memory, and the seat position is memorized.

Power Mirror Position Sensors

Using a tilt position sensor and a swing position sensor, the power mirror control circuit in the power mirror control unit detects the voltage changes created by the mirror moving. These voltage changes are stored in memory, and the power mirror positions are memorized for each stored driving position.

Reverse Mirror Control

When the vehicle is shifted to R (shift lever in R) with the power mirror selector switch in Left (or Right), the passenger's side mirror tilts down automatically to help the driver's view. The mirror returns to the previous position when the shift lever is shifted out of R. The reverse mirror control is cancelled if the power mirror selector switch is in the center or left position.

Power Door Lock Settings

The client can customize the power door lock setting according to their preferences (refer to the Owner's manual under door locks for more details). These setting are controlled independently by remotes (Driver 1 and Driver 2).