Operation CHARM: Car repair manuals for everyone.

Rear Seat Armrest Replacement




Rear Seat Armrest Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Gently pull forward on the top edge of the armrest center cover (A) to release the hook (B), then push forward to remove the cover.






2. Remove the pivot bolt, the wave washer (A), the washer (B), the armrest washer (C), and the 6 mm bolt (D).






3. Slide the armrest (A) toward the driver's side of the vehicle, and remove the center pin (B) from the frame (C) by pulling back on the armrest.





4. Install the armrest in the reverse order of removal, and note these items:

- If the collar (D) is damaged or stress-whitened, replace it with a new one.
- Push the hook into place securely.