Instrument Panel Removal / Installation

Instrument Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove these items:

- Right driver's dashboard panel Right Driver's Dashboard Panel Removal / Installation
- Left driver's dashboard panel Left Driver's Dashboard Panel Removal / Installation

2. Adjust the steering column to the full tilt down position, and to the full telescopic out position.

3. Remove the screws.





4. Gently pull out the instrument panel (A) to detach the clips, then remove the panel.

5. Install the panel in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.