Manual Transmission

FRONT EXHAUST PIPE (only MANUAL TRANSMISSION)

REMOVAL

Preparation:
^ Battery negative cable. Raise the vehicle and support with suitable safety stands.

Left Hand Side
1. O2 sensor harness connector
2. Transfer under cover
3. 3rd crossmember
4. Front exhaust pipe fixing nuts
^ Disconnect front exhaust pipe at exhaust manifold.

Right Hand Side
5. O2 sensor harness connector
6. Front exhaust pipe fixing nuts
^ Disconnect front exhaust pipe at exhaust manifold.
7. Front exhaust pipe fixing bolts and nuts
^ Disconnect front exhaust pipe at center exhaust pipe.
8. Front exhaust pipe

INSTALLATION
To install follow the removal steps in the reverse order, noting the following points.

NOTE:
^ Tighten the fixings to the specified torque.