Control Unit: Service and Repair
ReplacementNOTE: The VTM-4 control unit must be initialized after replacement, otherwise the 4WD system will not function.
1. Remove the front mounting bolts from the right third row seat, and fold the seat cushion back.
2. Remove the cover (A) from the right rear side trim panel to gain access to the VTM-4 control unit (B).
3. Remove the three bolts (C) from the VTM-4 control unit.
4. Disconnect the VTM-4 control unit connectors.
5. Install the VTM-4 control unit in the reverse order of removal.