Clearing Trouble Codes

NOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes.

Canceling the DTC Indication

- Turn the ignition switch OFF or
- Press the MEMO button, or the position button 1, or the position button 2, or
- Press one of the driving position adjustment switches.

Erasing the DTC from Memory

Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset button. Disconnect the battery negative cable for at least 30 seconds. After reconnecting the battery, enter the anti-theft code for the radio, then enter the customer's radio station presets.