4. Torque Converter Housing Disassemble & Service

Mainshaft Bearing and Oil Seal Replacement

Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
- Driver 07749-0010000
- Attachment, 62 x 68 mm 07746-0010500
- Attachment, 72 x 75 mm 07746-0010600





1. Remove the mainshaft bearing and oil seal with the special tool and a commercially available 3/8"-16 slide hammer (A).





2. Install the new mainshaft bearing until it bottoms in the housing with the special tools.





3. Install the new oil seal flush to the housing with the special tools.

Countershaft Bearing Replacement

Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A Driver 07749-0010000 Attachment, 62 x 68 mm 07746-0010500





1. Remove the countershaft bearing (A) with the special tool and a commercially available 3/8"-16 slide hammer (B).





2. Install the ATF guide plate (A).
3. Install the new bearing (B) into the housing (C) with the special tools.

Secondary Shaft Bearing Replacement

Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
- Driver 07749-0010000
- Driver attachment 07947-6340500





1. Remove the secondary shaft bearing (A) with the special tool and a commercially available 3/8"-16 slide hammer (B).





2. Install the ATF guide plate (A).
3. Install the new bearing (B) into the housing (C) with the special tools.

Control Shaft Oil Seal Replacement

Special Tools Required
- Driver 07749-0010000
- Attachment, 22 x 24 mm 07746-0010800





1. Remove the oil seal (A) from the torque converter housing (B).





2. Install the new oil seal flush to the torque converter housing with the special tools.