Air Register: Service and Repair

Dashboard Side Vent Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Driver's side is shown, and passenger's side is similar.




1. Carefully insert a trim tool next to the clip (A), and detach the clips by prying on the passenger's side vent (B), then remove the vent. Take care not to scratch the dashboard and related parts.
2. Set the vent in the opening, then push the clips into place securely.