Countershaft, M/T

Countershaft	Diameter of needle bearing contact area (clutch housing side)	Standard or new	40.000 - 40.015 mm
		Service limit	39.95 mm
	Diameter of distance collar contact area	Standard or new	39.937 - 39.950 mm
		Service limit	39.883 mm
	Diameter of ball bearing contact area (transmission housing side)	Standard or new	30.020 - 30.033 mm
		Service limit	29.97 mm
	Runout	Standard or new	0.02 mm <aximum
		Service limit	0.05 mm
	35 mm shim-to-bearing inner race clearance	Standard or new	0.04 - 0.10 mm
		Service limit	Adjust
Countershaft 1st gear	I.D.	Standard or new	52.010 - 52.029 mm
		Service limit	52.08 mm
	End play	Standard or new	0.06 - 0.16 mm
		Service limit	0.25 mm
	Thickness	Standard or new	22.92 - 22.97 mm
		Service limit	22.87 mm
Countershaft 2nd gear	I.D.	Standard or new	52.010 - 52.029 mm
		Service limit	52.08 mm
	End play	Standard or new	0.06 - 0.16 mm
		Service limit	0.25 mm
	Thickness	Standard or new	27.92 - 27.97 mm
		Service limit	27.87 mm
Countershaft 1st gear distance collar	I.D.	Standard or new	39.95 - 39.96 mm
		Service limit	39.97 mm
	O.D.	Standard or new	46.989 - 47.000 mm
		Service limit	46.94 mm
	Length	Standard or new	23.03 - 23.08 mm
Countershaft 2nd gear distance collar	I.D.	Standard or new	39.95 - 39.96 mm
		Service limit	39.97 mm
	O.D.	Standard or new	46.989 - 47.000 mm
		Service limit	46.94 mm
	Length	Standard or new	28.03 - 28.08 mm