Steering Angle Sensor: Service and Repair

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. Remove the steering wheel.
2. Remove the combination switch assembly.





3. Remove the combination light switch (A) and the wiper/washer switch (B).
4. Replace the combination switch body as an assembly (C).

NOTE: Do not remove the steering angle sensor from the combination switch body.

5. Install the combination switch in the reverse order of removal.
6. Reinstall the steering wheel.
7. Do the VSA sensors neutral position memorization.