Crankshaft Pulley

Crankshaft Pulley





Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
1 Hold the pulley with the handle (A) and holder attachment (B), then tighten the bolt to 64 Nm (6.5 kgf-m, 47 ft. lbs.) with a torque wrench and 19 mm socket (C).
2 Mark (D) the bolt head and crankshaft pulley as shown, then tighten the bolt an additional 60° (The mark on the bolt head line up with the mark on the crankshaft pulley).