Navigation System Controls

Screen All selections and instructions are displayed on the screen. This is a touch-screen display; you can enter information into the system by touching the images or icons with your finger. For example, you can enter a street name on the displayed keyboard by touching the individual letters.

When you select Reverse to back up the vehicle, the rear camera is activated and displays what is behind the vehicle on the navigation screen. While in Reverse, the navigation buttons and touch screen are disabled. While viewing the rear camera image, use the Zoom In/Out button to adjust the brightness. Use a soft cloth and a mild cleaner intended for eyeglasses or computer screens to clean the screen. Harsh chemicals or cloths may damage the screen.

MENU button - Press this button to change the display from the current screen to the "Entering a destination by" screen. When enroute to a destination, press this button to change to the "Change route" screen.

MAP/GUIDE button - Press this button to display a map of your current position for casual driving. When enroute, press this button to switch between the map and the guidance screen.

NC-INFO button - Press this button to display information and the climate control screen. The user can select set-up, trip computer, calendar, calculator, or voice command help. Refer to the climate control section of the owners manual for more information.

CANCEL button - Press this button to return to the previous screen.

*ZOOM button - When viewing a map, these buttons change the scale of the map. ZOOM IN shows less area with greater detail. The ZOOM IN button is also used to scroll UP in a page list. ZOOM OUT shows more area with less detail. The ZOOM OUT button is also used to scroll DOWN in a page list. When in reverse, the ZOOM IN button brightens, and the ZOOM OUT button darkens the rear view image.*

Joystick/ENT - The joystick moves left, right, up, and down. Use it to highlight menu selections, scroll through lists, or look around a displayed map. After making a selection in a menu or list, choose the selection by pushing in on the joystick. You can also choose a selection by touching it on the screen, and in most instances, you can use the voice control system to make a selection.

TALK - Press and release this button on the steering wheel to activate the voice control system. After pressing and releasing TALK, wait for the beep, then speak the command.





BACK - This does the same function as the CANCEL button. Press this button on the steering wheel to return to the previous display. After the previous display appears, the system prompts you for a command, and then beeps. Press and release the TALK button to give the desired command.