Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2005 >> RL V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Safing Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Safing Sensor: Service and Repair

Rear Safing Sensor Replacement

Removal

1. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
2. Disconnect the both side curtain airbag 2P connectors.
3. Remove the rear seat.
4. Disconnect the left side wire harness 2P connector from the rear sating sensor.




5. Using a Torx T30 bit, remove the Torx bolts (A) then remove the rear sating sensor (B).

Installation




1. Install the new rear sating sensor (A) with the Torx bolts (B) then connect the left side wire harness 2P connector (C) to the rear safing sensor.
2. Reconnect the negative cable to the battery.
3. After installing the rear sating sensor, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.
4. Reinstall all removed parts.
pro multis · About Operation CHARM