Without Scan Tool

Erasing the DTC from Memory

Without the HDS
Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the XM radio channel presets. Make sure the ignition switch is OFF. Disconnect the negative battery cable for at least 30 seconds. After reconnecting the battery, enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets. Reset the clock.

Erasing the Driving Position from Memory
1. Press and hold all three driving position memory switch bottoms.
2. Turn the ignition switch ON (II).
3. Continue to hold all three driving position memory switches for more than 5 seconds, and release them in less than 10 seconds.
4. The buzzer will sound for 500 ms to confirm that all driving position data is erased.