Driver's Power Seat Motor Test

Driver's Power Seat Motor Test

1. Remove the driver's seat.




2. Disconnect the connector from each power seat motor.

NOTE: All connectors are terminal side of male terminals.




3. Test each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
4. If the motor does not run or fails to run smoothly, replace:
- Slide motor
- '04 model
- '05-06 models
- Recline motor
- Front up-down motor
- '04 model
- '05-06 models
- Rear up-down motor
- '04 model
- '05-06 models