Vehicle Stability Assist
DTC 61: IG1 Voltage Low1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS,
3. Test-drive the vehicle at 2 mph (2 km/h) or more.
4. Check for DTCs with the HDS.
Is DTC 61 indicated?
YES - Go to step 5.
NO - Intermittent failure, the system is OK at this time. Check for loose terminals at the VSA modulator-control unit 46P connector. Refer to intermittent failures troubleshooting. How to Troubleshoot DTCs
5. Test the battery and check its connections.
Is the battery OK?
YES - Check for a poor connection at the battery terminals, and all IG1 circuit connections between the VSA modulator-control unit 46P connector terminal No. 40 and the under-dash fuse/relay box No. 4 (7.5 A) fuse. If the connections are good, go to the Alternator and Regulator Circuit Troubleshooting.
NO - Replace or charge the battery.