Radio Stays Powered With the Ignition Switch OFF
Radio Stays Powered With The Ignition Switch OFFNOTE:
- Check the vehicle battery condition first.
- Always check for aftermarket accessories plugged info the vehicle's accessory power sockets.
- Always check the connectors for poor connections or loose terminals.
1. Turn the ignition switch to ON (II).
2. Push the power switch OFF or turn the ignition switch to LOCK (0) to see if the audio unit turns OFF.
Does the audio unit turn OFF?
YES - Operation is normal.
NO - Go to step 3.
3. Turn the ignition switch to LOCK (0).
4. Remove the audio unit. Disconnect audio unit connector A (17P).
NOTE: Eject all the CDs before disconnecting the audio unit and CD changer to prevent damaging the CD player's load mechanism.
5. Measure the voltage between the No. 14 terminal of audio unit connector A (17P) and body ground.
Is there battery voltage?
YES - Check for short to power on the PUR wire.
NO - Replace the audio unit.