Right Driver's Dashboard Panel

Right Driver's Dashboard Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.




1. Gently pull out the right driver's dashboard center panel (A) to release the clip, then remove the panel.
2. Install the panel in the reverse order of removal, and note these items:
- Check if the clip is damaged or stress-whitened, and if necessary, replace it with a new one.
- Push the clips into place securely.