Symptom Troubleshooting

SRS Symptom Troubleshooting - Side airbag cutoff indicator stays on

Side airbag cutoff indicator stays on

1. Make sure nothing is on or front passenger's seat.

2. Make sure the seat-back is dry.

3. Turn the ignition switch to ON (II), and see if the SRS indicator comes on.

Does the SRS indicator come on and stay on?

YES -

Go to the Symptom Troubleshooting "SRS indicator stay on, but no DTCs are stored can not be read".

NO -

Go to step 4.

4. Connect the HDS to the data link connector (DLC) Reading and Clearing Diagnostic Trouble Codes.

5. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit Testing and Inspection.

6. Select Body Electrical status with the HDS.

7. Check for DTCs in the Gauge Menu with the HDS.

Is DTC B1187 indicated?

YES -

Troubleshooting DTC B1187 B1187.

NO -

Go to step 8.

8. Do the gauge control module self-diagnostic function Initial Inspection and Diagnostic Overview.

Does the side airbag cutoff indicator flash?

YES -

Initialize the ODS unit Programming and Relearning. If problem is still present, replace the OPDS sensor/seat-back cover/pad with equipped OPDS sensor Front Seat-back Cover/Pad Replacement. If the problem is still present, replace the SRS unit SRS Unit Replacement.�

NO -

Faulty gauge control module; replace the gauge control module Service and Repair.�