Torque Converter Housing Park Lever Shaft Bearing Replacement

Torque Converter Housing Park Lever Shaft Bearing Replacement

Special Tools Required

- Bearing Remover Shaft Set, 12 mm 07936-1660101
- Weight, Remover 07741-0010201
- Driver Handle, 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-0010800

1. Remove the park lever shaft bearing from the torque converter housing using the bearing remover shaft set (12 mm) and the remover weight.






2. Install a new bearing until it bottoms in the torque converter housing using the drive handle and the attachment (22 x 24 mm).