Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag: ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when the audio-navigation unit yaw rate sensor's temperature is out of its specified range.
- Check any official Honda service web site for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.
- Do this test only when the vehicle dash temperature is between-4 °F (-20 °C) and 158 °F (70 °C).

1. Clear the hard error code Navigation System Diagnostic Mode.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode Navigation System Diagnostic Mode.

4. Check the System Links.

Is the Yaw Sensor icon red?

YES -

Replace the navigation unit Service and Repair.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.�