46-2x

SRS DTC Troubleshooting: 46-2x, 46-8x, 46-Bx

DTC 46-2x, 46-8x, 46-Bx ("x" can be 0 thru 9 or A thru F):

Internal Failure of the Right Side Impact Sensor (second)

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the DTC with the HDS Reading and Clearing Diagnostic Trouble Codes.

2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then wait for 10 seconds.

3. Check for DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

Is DTC 46-2x, 46-8x, or 46-Bx indicated?

YES -

Faulty right side impact sensor (second) or SRS unit; replace the right side impact sensor (second) Side Impact Sensor (Second) Replacement, then clear the DTC. If the DTC is still present, replace the SRS unit SRS Unit Replacement.�

NO -

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures Reading and Clearing Diagnostic Trouble Codes. If another DTC is indicated, troubleshoot the DTC.�