Oil Change Reminder Lamp: Service and Repair

Resetting the Engine Oil Life Display

Reset the display after completing the required maintenance service. You will see "OIL LIFE 1OO%" on the display the next time you turn the ignition switch to the ON (II) position.

Once the maintenance service has been performed reset the maintenance minder as follows:

1. Turn the ignition switch to the ON (II) position.





2. If the engine oil life display is not displayed. press the SEL/RESET button oil the steering wheel repeatedly.

3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi-information display.





4. Select "RESET" by pressing the INFO button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to "100." If you want to cancel the oil life reset mode select "CANCEL."

Important Maintenance Precautions

If you perform the required service but do not reset the display, or reset the display without performing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because there will no longer be an accurate record of when maintenance is needed.

For more comprehensive information on reading, interpreting and resetting the MAINTENANCE SERVICE MINDERS viewed on the instrument display, Service Intervals