Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> TSX L4-2.4L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Front Impact Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Impact Sensor Replacement




Front Impact Sensor Replacement

Removal

1. Do the battery terminal disconnection procedure, Procedures then wait at least 3 minutes before starting work.

2. Remove the front bumper. Service and Repair

3. Left side; removal the intake air resonator. Service and Repair

4. Disconnect the left or right engine compartment wire harness 2P connector (A) from the front impact sensor (B).

5. Remove the TORX bolts (C) using a TORX T30 bit, then remove the front impact sensor.






Installation

1. Install the front impact sensor (A) with a new TORX bolts (B), using a TORX T30 bit.

2. Connect the left or right engine compartment wire harness 2P connector (C) to the front impact sensor.

3. Do the battery terminal reconnection procedure. Procedures

4. Clear any DTCs with the HDS. Reading and Clearing Diagnostic Trouble Codes

5. Confirm proper SRS operation: Turn the ignition switch to ON (II); the SRS indicator should come on for about 6 seconds and then go off.

6. Reinstall all removed parts.





pro multis · About Operation CHARM