Audio Disc Changer Does Not Load All Six Discs (Without Navigation)

Audio System Symptom Troubleshooting - Audio disc changer does not load all six discs

Audio disc changer does not load all six discs (without navigation)

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.

1. Turn the ignition switch to ON (II).

2. Turn on the audio unit, and try loading six discs into the audio unit (in-dash disc changer).

Does the audio unit accept all six discs?

YES -

Intermittent failure, the audio unit is OK at this time.�

NO -

Go to step 3.

3. Try loading the disc player with six known-good discs.

Does the audio unit (in-dash disc changer) accept all six discs?

YES -

At least one of the original discs is faulty.�

NO -

Substitute a known-good audio unit (in-dash disc changer) Audio Unit Removal/Installation, and recheck. If the symptom/indication goes away, replace the original audio unit (in-dash disc changer) Audio Unit Removal/Installation.�