Driver/Vehicle Information Display: Testing and Inspection

Multi-information Switch Test/Replacement

1. Remove the driver's airbag assembly Driver's Airbag Replacement.

2. Disconnect the cable reel subharness 20P connector (A) from the cable reel.





3. Measure the resistance between cable reel subharness 20P connector terminals No. 14 and No. 15 in each multi-information switch position according to the table.





4. If the resistance is not as specified, replace the cable reel subharness.

NOTE: If the switch is OK, but there is a problem with switch function, check the cable reel.