Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Rear Sensor Beeper Test/Replacement
Rear Sensor Beeper Test/Replacement
1. Remove the passenger's dashboard lower cover Passenger's Dashboard Undercover Removal / Installation.
2. Disconnect the 2P connector (A) and harness clip (B) from the rear sensor beeper bracket (C).
3. Remove the two screws, and remove the rear sensor beeper.
4. Test the beeper by connecting battery power to the rear sensor beeper 2P connector terminal No. 2 and ground to the terminal No. 1. The beeper should sound.
5. If the beeper does not sound, remove the harness clip (A).
6. Remove the two screws, and replace the rear sensor beeper (B).
7. Install the parts in the reverse order of removal.