Trip Computer-No Fuel Information
Navigation System Symptom Troubleshooting - Trip computer-no fuel information
Trip computer-no fuel information
Diagnostic Test: Self-Diagnosis Mode
NOTE:
- Check the vehicle battery condition first Testing and Inspection.
- Check the connectors for poor connections or loose terminals.
- Always check for and resolve all CAN DTCs before troubleshooting the navigation system.
- The navigation only displays the trip information. The calculations are done in the gauge control module.
- Before troubleshooting, make sure you have the anti-theft codes for the audio system and the navigation system.
- After troubleshooting, enter the anti-theft codes for the audio system and the navigation system.
- Verify that the correct navigation unit is installed for this model. Go into the System Diagnostic Mode, and use Version.
- Make sure that the correct navigation DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.
Do the System Links check to check the communication line between the PCM (FI-ECU) and the navigation unit.
1. Start the engine.
2. Go into the Self-Diagnosis Mode, and use Trip Information diagnostic under System Links.
Are the values greater than zero?
YES -
The system is OK.�
NO -
Check for B or F-CAN DTCs, then troubleshoot them.�