Body Emblem: Service and Repair

Emblem/Sticker Replacement

NOTE: When removing the emblems, take care not to scratch the body.

1. To remove the front "A" emblem, remove the front emblem base Service and Repair.

2. Clean the body bonding surface where emblems are applied with a shop towel dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3. Apply the emblems where shown. Use the application guide form as a guide when applying the RDX emblem and the TURBO emblem.

4. After installing the front "A" emblem, reinstall the front grille Service and Repair.