Power Lumbar Support Motor Test

Power Lumbar Support Motor Test

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the driver's seat Front Seat Removal / Installation.

2. Remove the seat-back cover Service and Repair.

3. Disconnect the 2P connector (A) from the lumbar support motor.






4. Test the motor by applying battery power and ground to the terminals according to the table. When the motor stops running, disconnect battery power immediately.





5. If the motor does not run or fails to run smoothly, replace it Front Seat Frame Replacement - Driver's Seat.