Driver's Dashboard Undercover Removal / Installation

Driver's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

1. Remove the driver's dashboard undercover (A).

1. Turn the lock knob (B) 90 °.

2. Gently pull down the right side edge to detach the clips.

3. Disconnect the driver's footwell light connector (C) and detach the harness clip (D).





2. Install the undercover in the reverse order of removal, and note these items:

- Replace any damaged clips with new ones.
- Push the clips into place securely.
- Make sure the connector is plugged in properly.