Alarm Module: Testing and Inspection

Immobilizer-Keyless Control Unit Registration

1. Have all registered keys and the PCM code.

2. Connect the HDS to the data link connector (DLC).

3. Turn the ignition switch to ON (II).

4. Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP.

5. Select REPLACE IMMOBILIZER RECEIVER/CONTROL UNIT.

6. Do the registration according to the instructions on the HDS screen.

7. Check if the engine can be started with all registered keys.

8. When prompted by the HDS, do the keyless transmitter programming.

9. Make sure the keyless remote operation works properly.