Step 6: Waxing and Suggested Repair Time

Waxing unlike polishing will seal the finish and prevent the recurrence of acid rain spots.

HAND WAX using clean cheesecloth and a good quality non-abrasive wax.

If, in extreme cases, you can still see acid rain spots after performing the previous six steps, or if the clearcoat has been penetrated, it will be necessary to re-paint the affected areas.

DSM authorization is required for ALL acid rain related reconditioning, as well as re-painting.


Suggested Repair Time

Remove acid rain spots following the six step reconditioning procedure.


Labor operation: L000910

Repair: 280 time units

Quality check: 20 time units

Total: 300 time units

Note

Authorized repairs can be processed using claim type Tl.





Acid Rain Spot Removal Flowchart