Ignition Cable
RESISTANCE SPECIFICATIONSIGNITION COIL:
NOTE: One of two types of ignition coils are used on vehicles with CIS fuel injection systems.
Primary Resistance - both types (measured between coil terminals 1 & 15)
RESISTANCE: 0.5 - 1.5 ohms
Secondary Resistance - both types (measured between coil terminals 1 & 4)
RESISTANCE: 5K - 9K ohms
IGNITION WIRES AND CONNECTORS:
COIL WIRE (with radio)
Resistance (with radio) 2000 +/- 800 ohms
Resistance (with radio) 0 ohms
SPARK PLUG WIRES
Resistance (with radio) 6000 +/- 1400 ohms
Resistance (with radio) 1000 +/- 400 ohms
If resistance is not within specification, check individual components.
SPARK PLUG CONNECTORS (with radio)
Resistance (with radio) 5000 +/- 1000 ohms
Resistance (with radio) 1000 +/- 400 ohms
CAP CONNECTORS
Resistance 1000 +/- 400 ohms
IGNITION WIRES (without connectors)
Resistance 0 ohms
DISTRIBUTOR ROTOR:
Measured between tip of electrode and center contact.
Resistance Approx. 1K ohms