Seat Cover and Padding For Split Rear Backrest (Up to m.y.1998), Removing and Installing

Seat Cover And Padding For Split Rear Backrest (up to m.y.1998), Removing And Installing

- Remove headrest by pressing button of left headrest guide.
- Rear backrest, removing and installing.







- Using screwdriver - 2 -, carefully lift headrest guide - 3 - out of rear backrest - 1 -.

NOTE: Do not damage seat cover when removing headrest guide.







- Remove bolts - 3 - (2x).
- Push release lever - 5 - back and remove bolt - 4 -.
- Remove lock - 6 - from rear backrest - 2 -.
- When installing lock - 6 -, release lever - 5 - has to engage in groove for release - 1 -.
- Remove ski sack.







- Using screwdriver - 2 -, pry backrest cover - 1 - out of retaining groove.

Installing:
- Insert cover with grip channel in retaining groove and tap into place using clean plastic hammer.