Evaporator Refrigerant Lines, Remove and Install

A/C Refrigerant System (R-134a) Major Components, Servicing

Evaporator Refrigerant Lines, Removing and Installing
- Discharge refrigerant system.







- Remove bolt -A-.
- Loosen refrigerant line clamp and remove lines from evaporator.
- Plug all open connections to prevent moisture and dirt contamination.
- Install in reverse order of removal.


CAUTION!
Immediately plug open connections on A/C components and lines to prevent dirt and moisture contamination.


NOTE:







- Replace O-rings -A- and -B-.
- O-ring -A-: 17.2 mm inside diameter, 1.8 mm thickness
- O-ring -B-: 10.8 mm inside diameter, 1.8 mm thickness
- Ensure lines fit into evaporator without binding.
- Torque retaining bolt -A- (illustration A87-0054) to 15 Nm (11.0 ft lb).