Clutch Pedal and Clutch Control Overview

Clutch Pedal and Clutch Control Overview






1. Mounting bracket
2. Pivot pin
- For clutch and brake pedals
- Installation position: groove (arrow) facing clutch pedal
3. Locking clip
4. Socket-head bolt
- 25 Nm (18 ft. lbs.)
5. Brake pedal
6. Clutch pedal
- Removing and installing, Clutch Pedal and Over-Center Spring, Removing and Installing
7. Pin and locking plate
- Clip onto clutch pedal
8. Locking clip
9. Clutch master cylinder
- Removing and installing, Service and Repair
- Do not operate after clutch pedal has been removed
10. Sockethead bolt
- 20 Nm (15 ft. lbs.)
11. Mount
- Insert in mounting bracket with over center spring
12. Over center spring
- Remove and install together with clutch pedal, Clutch Pedal and Over-Center Spring, Removing and Installing
- Application, Refer to parts supplier.
13. Sockethead bolt
- 5 Nm (44 inch lbs.)
- Secures pivot pin for clutch and brake pedal
14. Seal
15. Torx bolt
- 25 Nm (18 ft. lbs.)
- Also secures brake master cylinder to brake servo