Transceiver Installing (A6 Wagon Only)

Installing transceiver

- Remove the left rear close out compartment panel





- Locate the transceiver harness and the antenna cable in the bottom of the close out panel -arrow-

- Slide cable and harness through the opening in the transceiver bracket

- Install transceiver bracket part of kit to the existing studs in the body

- Attach the two 6 mm washer, serrated washers and nuts, available locally), to the bracket and tighten to 4.5 Nm (40 in. lb)

- Connect the transceiver harness and antenna cable to the transceiver





- Lock the two piece U channel transceiver bracket and attach it to the transceiver with two sheet metal screws in the holes provided (arrow)

Caution!
Each transceiver has its own electronic serial number (ESN). Always register new transceiver with the Cellular Telephone Company before placing a call.

- Program telephone