Transmitter, Coding

^ If a transmitter is being replaced the new one must be coded.

^ Up to four transmitters can be coded for each system.

^ If a new transmitter is being coded, the existing transmitters must also be coded.

^ In addition to transmitters, two vehicle keys are also needed for coding.

- Switch on ignition.

- Using second key, slowly lock vehicle at driver's side door lock, smoothly without jerking key in tumbler.

- Activate both transmitter buttons for at least 4 seconds.

^ The system should now be functional.

- Lock vehicle again at driver's side door lock, turn key slowly and smoothly in tumbler.

- Activate both buttons of second transmiter for at least 4 seconds.

^ When coding is completed, central locking is functional.

Note:

Repeat procedure with remaining transmitters if requested.

- After switching ignition off, radio-operated remote control is ready for use.